This product is no longer in stock
ANTI-GLARE SOLUTION FOR INDUSTRIAL LIGHTING
The LUMINA LED LD luminaire is the perfect lighting solution for industries based on detailed manual tasks. This anti-glare luminaire is unique in terms of the position of the LED modules inside the system. The modules are attached on the rear end of the structure, leaving a significant space between the modules and front glass. Adding to this, MIRO reflectors and a special matte glass help produce a special light effect similar to that of LED panel light, only much stronger.
LUMINA LED LD luminaries are also available with special Prismatic glass which can further reduce glare. These luminaries can be installed in heights ranging up to 10 meters. LUMINA LED LD can withstand extreme temperatures and work in ambience temperatures up to + 60°C (XT version).
Good to know: The system is fit to withstand over-voltages of 4kV. On special demand, protection can be increased to 10kV.
|Nominal system power (up to), W||128|
|Light source type||LED|
|LED module type||Philips Fortimo|
|Light Color Code||830, 840, 850|
|Lamp lifespan (hours)||Look at the data sheet|
|Power factor||0.90 and higher|
|Supply Voltage||220 - 230V AC|
|Supply Frequency||50 - 60 Hz|
|Standard operating temperature||-35 - +40 C|
|Storage Temperature||-40 - +60 C|
|RFI Suppression||EN 55015 / CISPR 15|
|Certificates||ENEC (EN60598-2-22:2014, EN60598-1:2015, EN60598-2-1:1989), NIZP-PZH|
|Electronic Control Gear||PHILIPS XITANIUM|
|Light and/or PIR sensor||Optional|
|Optical Cover||Opal or Microprismatic PMMA|
|Beam angle||Wide (60 deg.) or Very Wide (120 deg.) light beam|
|Built-in emergency pack||1 or 3 hours (optional)|
|Housing material||Powder coated mild steel (INOX as an option)|
|IK rating||07 or 09|